|
 |
Weld
Fittings are used on permanent installations where process
piping and equipment can be cleaned in place (CIP) and
removal from the system is not required. Weld Fittings are
offered in nominal tube sizes 1/2˝ through 8˝ in T304 and
T316L materials. Uniform wall thickness for 1/2˝ through 3˝
sizes measure .065 (16 ga). In 4˝ size, wall thickness
measures .083 (14 ga), 6˝ and 8˝ .109 (12 ga).
VNE
offers Polished ID and OD Fittings for immediate shipment.
Other polished combinations may be ordered. Our Weld
Fittings meet all 3A requirements.
|
|
Limited
Warranty
VNE Corporation products are warranted to be free from
defects in material and workmanship for a period
of one year from the date of shipment. Any product that
proves to be defective shall be repaired or
replaced at the option of VNE, providing it has been used as
recommended and in strict accordance with
recognized piping practices, and that has not been subject
to extraordinary service, such as encountered
under severe corrosive or abrasive conditions.
VNE makes no warranties, express or implied, other than
those listed above.
VNE shall not be liable for any consequential, indirect,
incidental or contingent damages. |
