 |
With close dimensional tolerances and outstanding elasticity, Tygothane® Precision Polyurethane Tubing provides worry-free attachment to fittings. |
Our rigidly controlled manufacturing process makes Tygothane® Precision Polyurethane Tubing the flexible polyurethane tubing that has consistently tight tolerances from lot to lot. Precision tolerances and high elasticity provide the user with an easy, worry-free attachment to fittings. Made of a tough, ester-based polyurethane, Tygothane® Precision Polyurethane Tubing’s clarity, high tear strength and excellent abrasion resistance make it ideal for many applications, including fuel and lubricant lines, pneumatic lines, abrasive product transfer and cable jacketing. It also offers exceptional resistance to oils, greases, fuels and many chemicals.
Able to withstand rugged daily use, Tygothane® Precision Polyurethane Tubing resists weathering and can be safely used in temperatures ranging from -100°F (-73°C) to 200°F (93°C). It meets FDA criteria for food and beverage use and is also available in ether-based, medical grade and reinforced formulations.
 Click here to view a datasheet with complete size chart
Features/Benefits
-
Consistently tight dimensional tolerances
- Excellent abrasion and tear resistance
- Fuel and lubricant resistant
- Sub-zero temperature capabilities
- Contains no chemicals listed in California’s Prop 65
- Phthalates-free
|
Typical Applications
-
Food & Cosmetic Processing
- Abrasive and Viscous Slurry Transfer
- Lubricant and Degreaser Dispensing
- Pellet and Powder Transfer
- Pneumatic Sensory Devices
- Instrumentation Control Lines
- Coolant Recovery Systems
|
Tygothane® C-210-A Typical Physical Properties
| Property | ASTM Method | Value or Rating |
|---|
| Durometer Hardness - Shore A, 15 sec |
D2240 |
82 |
| Color | - |
Transparent Natural |
| Tensile Strength - psi (MPa) |
D412 |
6,050 (41.7) |
| Ultimate Elongation, % |
D412 |
500 |
| Tear Resistance - lb-f/inch (kN/m) |
D1004
D624
Die C |
475 (83.1)
400 (70) |
| Specific Gravity | D792 |
1.20 |
| Water Absorption, % - 24 hours @ 23ºC |
D570 |
1.12 |
| Compression Set Constant Deflection, % - @ 158ºF (70ºC) for 22 hours |
D395 - Method B |
68 |
| Brittleness by Impact Temp - ºF (ºC) |
D746 |
-100 (-73) |
Max Recommended Operating Temp - ºF (ºC)
Intermittent
Prolonged | - |
200 (93)
175 (79) |
| Dielectric Strength - v/mil (kV/mm) |
D149 |
330 (12.9) |
Tensile Modulus,
@ 100% Elongation, psi (MPa)
@ 300% Elongation, psi (MPa) |
D412 |
800 (5.5)
1,500 (10.4) |
| Tensile Set, % |
D412 |
98 |
| Unless
otherwise noted, all tests were conducted at room
temperature (73ºF). Values shown were determined
on 0.075" thick extruded strip or 0.075" thick
molded ASTM plaques or molded ASTM durometer
buttons. |
For complete compliance information, visit www.processsystems.saint-gobain.com
|