| |
|
FLOWMETERS |
| |
|
|
DIVA
- Direct In-line Variable Area Flowmeter |
 |
The
DIVA flowmeter operates on the well established
spring loaded variable area (SLVA) principle, where
the area of an annular orifice is continuously
varied by a precision shaped moving cone. This cone
is free to move axially against the resistance of a
spring. View more information on the DIVA flowmeter
» |
| |
|
| |
|
|
Gilflo Flowmeters |
 |
Orifice
plates are still the most widely used type of
flowmeter today. They're pre-calibrated to a fixed
range and held as a finished item in stock ready for
immediate delivery. They are designed to be
installed as part of a system.
View more information
on Gilflo flowmeters » |
| |
|
| |
|
|
Orifice Plate Flowmeters |
 |
The
orifice plate is one in a group known as head loss
devices or differential pressure flowmeters. In
simple terms, the pipeline fluid is passed through a
restriction, and the pressure differential is
measured across that restriction.
View more
information on orifice plate flowmeters » |
| |
|
| |
|
|
Spiraflo Flowmeters |
 |
The
M111 Spiraflo transducer is a pipeline unit for use
on dry saturated and superheated steam only, as part
of a steam flowmetering system.
View more
information on Spiraflow flowmeters » |
|
|
|
|
REGULATORS |
| |
|
|
Steam
Handling Regulators |
 |
The IR1
and IRN1 international compressed air regulators
provide accurate pressure control for general
purpose pneumatic systems. The IR1 international
compressed air regulators are self-relieving while
the IRN1 international compressed air regulators are
non-relieving. View more information on steam
handling regulators » |
|
|
|
|
STEAM
TRAPS |
|
| |
|
|
Spirax Sarco BT6 Balanced Pressure Steam Trap |
 |
The
Spirax Sarco BT6 thermostatic balanced pressure
steam trap is designed to remove condensate from
hygienic and sanitary steam systems with minimal
backing up. Applications include sterile steam
barriers, block and bleed systems, drainage of steam
distribution lines, process vessels and CIP/SIP
systems. View more information on the Spirax Sarco
BT6 balanced pressure steam trap » |
| |
|
| |
|
|
Spirax Sarco BTM7 Stainless Steel Thermostatic Clean
Steam Trap |
 |
The
Spirax Sarco BTM7 is a maintainable thermostatic
steam trap designed to remove condensate from clean
steam systems with minimal backing up. Applications
include sterile steam barriers, process vessels and
CIP/SIP systems.
View more information on the Spirax
Sarco BTM7 stainless steel thermostatic clean steam
trap » |
| |
|
| |
|
|
Balanced Pressure Steam Traps |
 |
Balanced pressure thermostatic steam traps adjust
automatically to varying steam pressures. The
balanced pressure principle is now the most widely
accepted for applications where thermostatic steam
traps can utilize sensible heat in the condensate
and reduce flash steam losses.
View more information
on balanced pressure steam traps » |
| |
|
| |
|
|
Ball
Float Steam Traps |
 |
Austenitic stainless steel is the material of choice
for clean processes and sterilization equipment
within the food, beverage, pharmaceutical and health
care industries. Its properties make it particularly
resistant to corrosion or reactions of any sort,
both internally and externally.
View more
information on ball float steam traps » |
| |
|
| |
|
|
Bimetallic Steam Traps |
 |
Bimetallic steam traps can conserve energy by
discharging sub-cooled condensate in those
applications which utilize sensible heat. The
bimetallic steam traps are used primarily to control
the release of condensate so that its sensible heat
can be utilized and energy losses caused by flash
steam on discharge reduced, all important in today's
energy conscious world.
View more information on
bimetallic steam traps » |
| |
|
| |
|
|
Fixed
Temperature Discharge Steam Traps |
 |
The
fixed temperature discharge steam trap employs a
liquid expansion device to discharge condensate at a
predefined temperature. It can easily be adjusted on
site to any temperature within the operating range.
View more information on fixed temperature discharge
steam traps » |
| |
|
| |
|
|
Inverted Bucket Steam Traps |
 |
The
inverted bucket steam traps employ a simple and well
proven principle which relies on the difference in
density between steam (a vapor) and condensate (a
liquid). They have a robust design and incorporate a
simple density sensitive bucket and lever mechanism.
View more information on inverted bucket steam traps
» |
| |
|
| |
|
|
Sealed Steam Traps |
 |
The
SIB30, SIB30H and SIB45 are all stainless steel
sealed inverted bucket steam traps. They are
supplied with a specified pressure change assembly
depending on the required operating pressure
differential. The traps are available with a range
of seat sizes to suit pressure differentials.
View
more information on sealed steam traps » |
| |
|
| |
|
|
Thermodynamic Steam Traps |
 |
Thermodynamic steam traps are simple, robust and
reliable and can operate up to very high
temperatures and pressures. The trap operates by
means of the dynamic effect of flash steam as it
passes through the trap. The only moving part is the
disc above the flat face inside the control chamber
or cap. View more information on thermodynamic steam
traps » |
