» Products » Sanitary PD Pumps

Sanitary PD Pumps

24 Series Tri Lobe Pump

Jabsco 24-series hygienic rotary lobe pumps have been in service worldwide for nearly 20 years. The continued popularity of the 24-series reflects the advanced hygienic design and manufacturing methods brought in by Jabsco at the time of its introduction. 24-series pumps use the tri-lobe rotor design proven in service with the world's leading producers of food products, pharmaceuticals and cosmetics.

Features

Flow rates up to 126m³/hr (35 litres/second)
Pressures up to Up to 10bar (146 psi)
Temperature range: -40ºC to +200ºC
Liquid viscosity range: 1 to 1,000,000 centipoise

MODEL	SPECIFICATIONS
MODEL	DISPLACEMENT	PORT SIZE INLET/OUTLET STANDARD	PORT SIZE INLET/OUTLET ENLARGED	MAX. FLOW RATE	MAX. PRESSURE	MAX SPEED
S2	3.6 litres (0.92 US gal)/100 revs	25mm (1")	-	36lpm (9.2gpm)	7bar (101psi)	1000 rpm
A1	10.4 litres (2.75 US gal)/100 revs	25mm (1")	38mm (1 1/2")	100lpm (27.5gpm)	15bar (217psi)	960 rpm
A2	18.6 litres (4.91 US gal)/100 revs	25mm (1")	38mm (1 1/2")	177lpm (49.1gpm)	10bar (145psi)	960 rpm
B1	24.5 litres (6.47 US gal)/100 revs	38mm (1 1/2")	50mm (2")	237lpm (64.7gpm)	15bar (217psi)	960 rpm
B2	37.7 litres (9.96 US gal)/100 revs	38mm (1 1/2")	50mm (2")	4	10bar (145psi)	960 rpm
C1	62.3 litres (16.46 US gal)/100 revs	50mm (2")	76mm (3")	448lpm (118gpm)	14bar (203psi)	720 rpm
C2	93.6 litres (24.72 US gal)/100 revs	50mm (2")	76mm (3")	655lpm (173gpm)	10bar (145psi)	700 rpm
D1	122 litres (32.23 US gal)/100 revs	76mm (3")	100mm (4")	793lpm (209.5gpm)	12bar (174psi)	650 rpm
D2	161 litres (42.53 US gal)/100 revs	76mm (3")	100mm (4")	1000lpm (264.2gpm)	9bar (130psi)	620 rpm
E2	350 litres (92.46 US gal)/100 revs	152mm (6")	-	2100lpm (554.8gpm)	12bar (174psi)	600 rpm

Adaptable: modular design permits prompt pump assembly to suit the exact specification required for a given application.

Rugged: large diameter shafts, mounted in precision tapered-roller bearings and rigidly mounted for maximum shaft stiffness, to resist over-pressure and other kinds of rough use.

Low Maintenance: shaft, bearing and gear assemblies are immersed in an oil bath, for long life even at the pump's limits of operating pressure and temperature. Fully interchangeable rotors avoid the need for routine re-timing, but the timing gears are easily accessible if re-timing should become necessary.

55 Series & Ultima Lobe Pumps

For the very highest standards of sterile containment cleaning in-place (CIP) and steam-sterilizing (SIP)

Applications

Biotechnology
Sterile pharmaceuticals
Ultra-hygienic food processing
Separation equipment

Aseptic manufacturing
Multi-product facilities
Sanitary/hygienic production
Sampling

Benefits

Fully self-draining pump head: no hold-up of process liquid or cleaning agents.
Rapid de-contamination and product change-over.
External rotor fixing - no internal crevices.
Low-carbon 316L stainless-steel for maximum corrosion resistance.
Controlled-compression gasket-type joints and no O-rings in product contact.
Shaft seal design combines highest levels of containment with total product draining, no cavities, and front access for easy inspection and fast maintenance.
Standard surface finish: 0.8µm (150 grit), with 0.5µ (240 grit) and electropolish options.
Optional steam/sterile fluid barriers on joints, for true aseptic processes.
High efficiency to minimize damage to shear-sensitive low viscosity fluids.

Features

Flow rates up to 44m³/hr (12 litres/second)
Pressures up to Up to 20bar (290 psi)
Temperature range: -30ºC to +140ºC
Liquid viscosity range: 1 to 1,000,000 centipoise
Ports: ½" to 4" (13mm to 100mm)

MODEL	SPECIFICATIONS
MODEL	DISPLACEMENT	PORT SIZE INLET/OUTLET STANDARD	PORT SIZE INLET/OUTLET ENLARGED	MAX. FLOW RATE	MAX. PRESSURE	MAX SPEED
55210	1 litre (0.26 USgpm)	12.5mm (1/2")	-	16lpm (4.2 USgpm)	14bar (203psi)	1500 rpm
55320	2.9 litres (0.77 USgpm)	19mm (3/4")	-	44lpm (11.6 USgpm)	20bar (290psi)	1500 rpm
55420	6.7 litres (1.77 USgpm)	25mm (1")	-	67lpm (17.7 USgpm)	20bar (290psi)	1000 rpm
LU42	12.3 litres (3.25 USgpm)	25mm (1")	38mm (1 1/2")	123lpm (32.5 USgpm)	15bar (217psi)	1000 rpm
LU44	20.4 litres (5.39 USgpm)	38mm (1 1/2")	50mm (2")	204lpm (53.9 USgpm)	8bar (116psi)	1000 rpm
LU52	26.5 litres (7 USgpm)	38mm (1 1/2")	50mm (2")	254lpm (70 USgpm)	15bar (217psi)	1000 rpm
LU54	45.5 litres (12.02 USgpm)	50mm (2")	76mm (3")	437lpm (120.2 USgpm)	8bar (116psi)	1000 rpm
LU62	64 litres (16.90 USgpm)	63mm (2 1/2")	76mm (3")	461lpm (121.8 USgpm)	15bar (217psi)	720 rpm
LU64	95 litres (25.1 USgpm)	76mm (3")	100mm (4")	684lpm (180.7 USgpm)	8bar (116psi)	720 rpm

Hy-Line Rotary Pumps

JABSCO Hy-Line Rotary Lobe pumps are robust, durable machines designed for long life in demanding applications. Modular construction, using interchangeable parts, enables pumps with a wide range of seal, port and rotor configurations to be built and motorized on short lead times.

View Technical Data Sheet (PDF)


Features Flow rates up to 108m³/hr (30 litres/second) Pressures up to Up to 15bar (220 psi) Temperature range: -40ºC to +140ºC Liquid viscosity range: 1 to 1,000,000 centipoise Hygienic - approved to American 3A standard Gentle pumping action suits viscous, delicate and particle-laden liquids Easy to clean, easy to maintain AISI316 stainless steel construction
Applications
Food Ingredients Confectionery Bakery Milk and Dairy Products Cosmetics Chemicals Meat Products Brewing and Soft Drinks	Pharmaceuticals Abrasive Suspensions Transfer Process Filling Metering Filtration Circulation Tankers

MODEL	SPECIFICATIONS
MODEL	DISPLACEMENT	PORT SIZE INLET/OUTLET STANDARD	PORT SIZE INLET/OUTLET ENLARGED	MAX. FLOW RATE	MAX. PRESSURE	MAX SPEED
LH32	3.5 litres (0.92 US gal)/100revs	19mm (3/4")	25mm (1")	52lpm (13.7 US gal)	15bar (217psi)	1500 rpm
LH34	7 litres (1.85 US gal)/100revs	25mm (1")	38mm (1 1/2")	105lpm (27.7 US gal)	8bar (116psi)	1500 rpm
LH42	12.3 litres (3.25 US gal)/100revs	25mm (1")	38mm (1 1/2")	123lpm (32.5 US gal)	15bar (217psi)	1000 rpm
LH44	20.4 litres (5.39 US gal)/100revs	38mm (1 1/2")	50mm (2")	204lpm (53.9 US gal)	8bar (116psi)	1000 rpm
LH52	26.5 litres (7 US gal)/100revs	38mm (1 1/2")	50mm (2")	265lpm (70 US gal)	15bar (217psi)	1000 rpm
LH54	45.5 litres (12.02 US gal)/100revs	50mm (2")	76mm (3")	455lpm (120.2 US gal)	8bar (116psi)	1000 rpm
LH62	64 litres (16.9 US gal)/100revs	63mm (2 1/2")	76mm (3")	461lpm (121.8 US gal)	15bar (217psi)	720 rpm
LH64	95 litres (25.10 US gal)/100revs	76mm (3")	100mm (4")	684lpm (180.7 US gal)	8bar (116psi)	720 rpm
LH72	123 litres (32.5 US gal)/100revs	76mm (3")	100mm (4")	836lpm (220.8 US gal)	15bar (217psi)	680 rpm
LH74	205 litres (54.15 US gal)/100 revs	100mm (4")	152mm (6")	1230lpm (324.9 US gal)	8bar (116psi)	600 rpm
LH76	301.5 litres 79.65 US gal)/100revs	127mm (5")	152mm (6")	1809lpm (477.9 US gal)	5bar (72psi)	600 rpm

Hy-Line Tanker Pumps

The Hy-Line LT range of truck mounted pumps are used for the loading and unloading of a wide variety of products. These include:

Food / Dairy / Beverage - including syrups, glucose, chocolate, fruit extracts, edible, oils, milk.
Pharmaceuticals / Chemicals.

View Technical Data Sheet (PDF)

Features

Corrosion resistant 316 stainless steel pumphead
Lightweight aluminum bearing housing
Adaptable foot mounting for horizontal or vertical port orientation
All seals accessible from the front of the pump without dismantling pipework
Scimitar rotors for high efficiency, smooth flow and high tolerance of abuse
Exceptionally quick and easy maintenance
Easy change port type/size
Flush rotor fixing and easy access seals ensure maximum cleanability – including CIP
Reversible flow

Bearing Housing	Epoxy coated aluminum
Elastomers	Nitrile to 3A 18-02 - EPDM to FDA title 21, para 177.2600 - Viton to FDA title 21, para 177.2600 - PTFE
Pump Head	316 stainless steel (1.4401)
Standards	Conforms to US-3A standard 02-09, Designed to meet EHEDG protocols for CIP, US-FDA materials of construction
Drive	"Plug-in" Hydraulic motor mounting - Conventional long coupled drive for electric motor, hydraulic motor or PTO, using LH Series (not shown)
LPM	LT52 - 254 L/M - LT54 - 437 L/M - LT62 - 461 L/M - LT64 - 684 L/M Litre per minute
Cover	Plain - Integral pressure relief valve
Port(s)	Clamp, BSP, IDF, RJT, SMS, DIN, 3A bevel seat, NPT, others on request
Max. Pressure	LT52 - 15 Bar - LT54 - 8 Bar - LT62 - 15 Bar - LT64 - 8 Bar
Mounting Type	Horizontal or vertical port orientation
Seal	O-ring seals - Single mechanical seal - carbon/stainless steel - carbon/silicon carbide - silicon carbide/silicon carbide - all with flush if required
Temperature Range	-30ºC to +140ºC
Viscosity	1 to 1 million cP