|
Sanitary PD Pumps |
24
Series Tri Lobe Pump
Jabsco 24-series hygienic rotary lobe pumps have been in
service worldwide for nearly 20 years. The continued
popularity of the 24-series reflects the advanced
hygienic design and manufacturing methods brought in
by Jabsco at the time of its introduction. 24-series
pumps use the tri-lobe rotor design proven in
service with the world's leading producers of food
products, pharmaceuticals and cosmetics.
Features:
- Flow rates up to 126m³/hr (35 litres/second)
- Pressures up to Up to 10bar (146 psi)
- Temperature range: -40ºC to +200ºC
- Liquid viscosity range: 1 to 1,000,000 centipoise
MODEL | SPECIFICATIONS |
DISPLACEMENT | PORT SIZE
INLET/OUTLET
STANDARD | PORT SIZE
INLET/OUTLET
ENLARGED | MAX. FLOW RATE | MAX. PRESSURE | MAX SPEED |
S2 | 3.6 litres
(0.92 US gal)/100 revs | 25mm (1") | - | 36lpm (9.2gpm) | 7bar (101psi) | 1000 rpm |
A1 | 10.4 litres
(2.75 US gal)/100 revs | 25mm (1") | 38mm (1 1/2") | 100lpm (27.5gpm) | 15bar (217psi) | 960 rpm |
A2 | 18.6 litres
(4.91 US gal)/100 revs | 25mm (1") | 38mm (1 1/2") | 177lpm (49.1gpm) | 10bar (145psi) | 960 rpm |
B1 | 24.5 litres
(6.47 US gal)/100 revs | 38mm (1 1/2") | 50mm (2") | 237lpm (64.7gpm) | 15bar (217psi) | 960 rpm |
B2 | 37.7 litres
(9.96 US gal)/100 revs | 38mm (1 1/2") | 50mm (2") | 4 | 10bar (145psi) | 960 rpm |
C1 | 62.3 litres
(16.46 US gal)/100 revs | 50mm (2") | 76mm (3") | 448lpm (118gpm) | 14bar (203psi) | 720 rpm |
C2 | 93.6 litres
(24.72 US gal)/100 revs | 50mm (2") | 76mm (3") | 655lpm (173gpm) | 10bar (145psi) | 700 rpm |
D1 | 122 litres
(32.23 US gal)/100 revs | 76mm (3") | 100mm (4") | 793lpm (209.5gpm) | 12bar (174psi) | 650 rpm |
D2 | 161 litres
(42.53 US gal)/100 revs | 76mm (3") | 100mm (4") | 1000lpm (264.2gpm) | 9bar (130psi) | 620 rpm |
E2 | 350 litres
(92.46 US gal)/100 revs | 152mm (6") | - | 2100lpm (554.8gpm) | 12bar (174psi) | 600 rpm |
Adaptable: modular design permits prompt pump assembly to suit the exact specification required for a given application.
Rugged: large diameter shafts, mounted in precision tapered-roller bearings and rigidly mounted for maximum shaft stiffness, to resist over-pressure and other kinds of rough use. Low Maintenance: shaft, bearing and gear assemblies are immersed in an oil bath, for long life even at the pump's limits of operating pressure and temperature. Fully interchangeable rotors avoid the need for routine re-timing, but the timing gears are easily accessible if re-timing should become necessary.
|
55 Series & Ultima Lobe Pumps

For the very highest standards of sterile containment cleaning in-place (CIP) and steam-sterilizing (SIP)
Applications:
- Biotechnology
- Sterile pharmaceuticals
- Ultra-hygienic food processing
- Separation equipment
|
- Aseptic manufacturing
- Multi-product facilities
- Sanitary/hygienic production
- Sampling
|
Benefits:
- Fully self-draining pump head: no hold-up of process
liquid or cleaning agents.
- Rapid de-contamination and product change-over.
- External rotor fixing - no internal crevices.
Low-carbon 316L stainless-steel for maximum corrosion resistance.
- Controlled-compression gasket-type joints and no O-rings in product contact.
- Shaft seal design combines highest levels of containment with total product
draining, no cavities, and front access for easy inspection and fast
maintenance.
- Standard surface finish: 0.8µm (150 grit), with 0.5µ (240 grit) and
electropolish options.
- Optional steam/sterile fluid barriers on joints, for true aseptic processes.
- High efficiency to minimize damage to shear-sensitive low viscosity fluids.
Features:
- Flow rates up to 44m³/hr (12 litres/second)
- Pressures up to Up to 20bar (290 psi)
- Temperature range: -30ºC to +140ºC
- Liquid viscosity range: 1 to 1,000,000 centipoise
- Ports: ½" to 4" (13mm to 100mm)
MODEL | SPECIFICATIONS |
DISPLACEMENT | PORT SIZE
INLET/OUTLET
STANDARD | PORT SIZE
INLET/OUTLET
ENLARGED | MAX. FLOW RATE | MAX. PRESSURE | MAX SPEED |
55210 | 1 litre
(0.26 USgpm) | 12.5mm (1/2") | - | 16lpm
(4.2 USgpm) | 14bar (203psi) | 1500 rpm |
55320 | 2.9 litres
(0.77 USgpm) | 19mm (3/4") | - | 44lpm
(11.6 USgpm) | 20bar (290psi) | 1500 rpm |
55420 | 6.7 litres
(1.77 USgpm) | 25mm (1") | - | 67lpm
(17.7 USgpm) | 20bar (290psi) | 1000 rpm |
LU42 | 12.3 litres
(3.25 USgpm) | 25mm (1") | 38mm (1 1/2") | 123lpm
(32.5 USgpm) | 15bar (217psi) | 1000 rpm |
LU44 | 20.4 litres
(5.39 USgpm) | 38mm (1 1/2") | 50mm (2") | 204lpm
(53.9 USgpm) | 8bar (116psi) | 1000 rpm |
LU52 | 26.5 litres
(7 USgpm) | 38mm (1 1/2") | 50mm (2") | 254lpm
(70 USgpm) | 15bar (217psi) | 1000 rpm |
LU54 | 45.5 litres
(12.02 USgpm) | 50mm (2") | 76mm (3") | 437lpm
(120.2 USgpm) | 8bar (116psi) | 1000 rpm |
LU62 | 64 litres
(16.90 USgpm) | 63mm (2 1/2") | 76mm (3") | 461lpm
(121.8 USgpm) | 15bar (217psi) | 720 rpm |
LU64 | 95 litres
(25.1 USgpm) | 76mm (3") | 100mm (4") | 684lpm
(180.7 USgpm) | 8bar (116psi) | 720 rpm |
|
Hy-Line Rotary Pumps
JABSCO Hy-Line Rotary Lobe pumps are robust, durable machines designed for long life in demanding applications. Modular construction, using interchangeable parts, enables pumps with a wide range of seal, port and rotor configurations to be built and motorized on short lead times. View Technical Data Sheet (PDF)
|
|
Features:
- Flow
rates up to 108m³/hr (30 litres/second)
-
Pressures up to Up to 15bar (220 psi)
-
Temperature range: -40ºC to +140ºC
- Liquid
viscosity range: 1 to 1,000,000
centipoise
-
Hygienic - approved to American 3A
standard
- Gentle
pumping action suits viscous, delicate
and
particle-laden liquids
- Easy to
clean, easy to maintain
- AISI316
stainless steel construction
|
Applications:
- Food
Ingredients
-
Confectionery
- Bakery
Milk and Dairy Products
-
Cosmetics
-
Chemicals
- Meat
Products
- Brewing
and Soft Drinks
|
-
Pharmaceuticals
-
Abrasive Suspensions Transfer
- Process
Filling
-
Metering
-
Filtration
-
Circulation Tankers
|
|
| SPECIFICATIONS |
MODEL | DISPLACEMENT | PORT SIZE INLET/OUTLET STANDARD |
PORT SIZEINLET/OUTLET ENLARGED | MAX. FLOW RATE | MAX. PRESSURE |
MAX SPEED |
LH32 | 3.5 litres
(0.92 US gal)/100revs | 19mm (3/4") | 25mm (1") | 52lpm
(13.7 US gal) | 15bar (217psi) | 1500 rpm |
LH34 | 7 litres
(1.85 US gal)/100revs | 25mm (1") | 38mm (1 1/2") | 105lpm
(27.7 US gal) | 8bar (116psi) | 1500 rpm |
LH42 | 12.3 litres
(3.25 US gal)/100revs | 25mm (1") | 38mm (1 1/2") | 123lpm
(32.5 US gal) | 15bar (217psi) | 1000 rpm |
LH44 | 20.4 litres
(5.39 US gal)/100revs | 38mm (1 1/2") | 50mm (2") | 204lpm
(53.9 US gal) | 8bar (116psi) | 1000 rpm |
LH52 | 26.5 litres
(7 US gal)/100revs | 38mm (1 1/2") | 50mm (2") | 265lpm
(70 US gal) | 15bar (217psi) | 1000 rpm |
LH54 | 45.5 litres
(12.02 US gal)/100revs | 50mm (2") | 76mm (3") | 455lpm
(120.2 US gal) | 8bar (116psi) | 1000 rpm |
LH62 | 64 litres
(16.9 US gal)/100revs | 63mm (2 1/2") | 76mm (3") | 461lpm
(121.8 US gal) | 15bar (217psi) | 720 rpm |
LH64 | 95 litres
(25.10 US gal)/100revs | 76mm (3") | 100mm (4") | 684lpm
(180.7 US gal) | 8bar (116psi) | 720 rpm |
LH72 | 123 litres
(32.5 US gal)/100revs | 76mm (3") | 100mm (4") | 836lpm
(220.8 US gal) | 15bar (217psi) | 680 rpm |
LH74 | 205 litres
(54.15 US gal)/100 revs | 100mm (4") | 152mm (6") | 1230lpm
(324.9 US gal) | 8bar (116psi) | 600 rpm |
LH76 | 301.5 litres
(79.65 US gal)/100revs | 127mm (5") | 152mm (6") | 1809lpm
(477.9 US gal) | 5bar (72psi) | 600 rpm |
|
Hy-Line Tanker Pumps
The Hy-Line LT range of truck mounted pumps are used for the loading and unloading of a wide variety of products. These include: Food / Dairy / Beverage - including syrups, glucose, chocolate, fruit extracts, edible, oils, milk. Pharmaceuticals / Chemicals. View Technical Data Sheet (PDF)
Features:
-
Corrosion resistant 316 stainless steel
pumphead
-
Lightweight aluminum bearing housing
-
Adaptable foot mounting for horizontal
or vertical port orientation
- All
seals accessible from the front of the
pump without dismantling pipework
-
Scimitar rotors for high efficiency,
smooth flow and high tolerance of abuse
-
Exceptionally quick and easy maintenance
- Easy
change port type/size
- Flush
rotor fixing and easy access seals
ensure maximum cleanability – including
CIP
-
Reversible flow
Bearing Housing | Epoxy coated aluminum |
Elastomers | Nitrile to 3A 18-02 - EPDM to FDA title 21, para 177.2600 - Viton to FDA title 21, para 177.2600 - PTFE |
Pump Head | 316 stainless steel (1.4401) |
Standards | Conforms to US-3A standard 02-09, Designed to meet EHEDG protocols for CIP, US-FDA materials of construction |
Drive | "Plug-in" Hydraulic motor mounting - Conventional long coupled drive for electric motor, hydraulic motor or PTO, using LH Series (not shown) |
LPM | LT52 - 254 L/M - LT54 - 437 L/M - LT62 - 461 L/M - LT64 - 684 L/M Litre per minute |
Cover | Plain - Integral pressure relief valve |
Port(s) | Clamp, BSP, IDF, RJT, SMS, DIN, 3A bevel seat, NPT, others on request |
Max. Pressure | LT52 - 15 Bar - LT54 - 8 Bar - LT62 - 15 Bar - LT64 - 8 Bar |
Mounting Type | Horizontal or vertical port orientation |
Seal | O-ring seals - Single mechanical seal - carbon/stainless steel - carbon/silicon carbide - silicon carbide/silicon carbide - all with flush if required |
Temperature Range | -30ºC to +140ºC |
Viscosity | 1 to 1 million cP |
|
|
|