|
Chemically resistant and
non-contaminating,
Tygon® Inert Tubing provides the outstanding
larity and flexibility of Tygon® tubing,
combined
with the inertness of a flouropolymer. |
Biopharmaceutical Formulation SE-200
Features/Benefits
-
Crystal
clear for easy visual flow monitoring
-
Better
flexibility than typical rigid
flouropolymer tubings
-
Chemically resistant and inert
-
Non-contaminating fluid path
-
Meets FDA
criteria for food contact
Typical Applications
-
Chemical
Processing
-
Pharmaceutical Processing and filling
-
Paint and
Solvent Production and Packaging
-
Adhesive
transfer lines
-
Semiconductor Processing
-
Photographic Processing Equipment
-
Beverage
Dispensing
-
Ink and
Toner Feed Lines
-
Fertilizer and Pesticide Distribution
|
|
Without
sacrificing the flexibility, glass-like clarity or
outstanding bend radius for which Tygon® tubing is
known, Tygon® Inert Tubing can handle many
applications where flexible tubing of the past could
not be used. Its FEP inner liner provides the
ultimate in chemical resistance and can handle a
wide variety of fluids from corrosives to MEK-based
solvents. The liner is inert, meaning it will not
extract or contaminate fluids being transferred.
The fluid path will not impart odor or taste, making
it well suited for food and beverage use. It meets
FDA criteria for food and beverage applications, as
well as USP Class VI criteria for biocompatibility.
Tygon®
Inert Tubing combines all the benefits of Tygon®
with the inertness of a flouropolymer, providing
superior performance in many applications and
industries.
Click
for complete size chart
Tygon®
SE-200 Tubing Typical Physical Properties
|
Property |
ASTM Method |
Value or Rating |
|
Durometer Hardness - Shore A, 15 sec |
D2240-02 |
67 |
|
Color |
- |
Clear |
|
Tensile Strength - psi (MPa) |
D412-98 |
2,000 (13.8) |
|
Ultimate Elongation, % |
D412-98 |
350 |
|
Tear Resistance - lb-f/inch (kN/m) |
D412-94 |
165 (29) |
|
Specific Gravity |
D792-00 |
1.45 |
|
Water Absorption, % - 24 hours @ 23ºC |
D570-98 |
< 0.01 |
|
Compression Set Constant Deflection, % - @
158ºF (70ºC) for 22 hours |
D395-01 - Method B |
53 |
|
Brittleness by Impact Temp - ºF (ºC) |
D746-98 |
-40 (-40) |
|
Max Recommended Operating Temp - ºF (ºC) |
- |
170 (77) |
|
Dielectric Strength - v/mil (kV/mm) |
D149-97 |
620 (24.4) |
|
Tensile Modulus, @ 200% Elongation, psi (MPa) |
D412-98 |
650 (4.5) |
|
Tensile Set, % |
D412-98 |
76 |
Unless
otherwise noted, all tests were conducted at room
temperature (73ºF). Values shown were determined
on 0.075" thick extruded strip or 0.075" thick
molded ASTM plaques or molded ASTM durometer
buttons. |
