|
|
| |
| |
Tygon®
UV Resistant Tubing - R-3400 |
|
Tygon®
UV Resistant Tubing will meet UL 94V-0
and UL 94HB flammability ratings. |
UV
Resistant Formulation R-3400
Features/Benefits
-
Black in color, protects light-sensitive
fluids
-
Wide range of chemical resistance
-
Excellent burn resistance
-
Ozone and
UV light resistant
-
Low compression set; resists permanent
deformation
-
Available in clear formulation for fluid
flow monitoring
Typical Applications
-
Corrosive
diffusible gases
-
Acid and
caustic transfer
-
Fertilizer and pesticide dispensing
-
Electrical insulation lines
-
Ink and
adhesive dispensing
-
General
maintenance
|
|
Versatility in Chemical
Resistance
Ideal for virtually any permanent or temporary
chemical transfer application, Tygon®
UV Resistant Tubing combines suppleness and
flexibility with resistance to a wide range of
chemicals. It shows exceptional resistance to strong
acids and many alkalies.
The flexibility of Tygon®
UV
Resistant Tubing makes it quick and easy to put into
service, providing considerable savings on
installation time and cost.
Outstanding
Weatherability
Black in color, is is resistant to ultraviolet
light, ozone and weathering, making it ideal for
many outdoor applications. Standard inventoried
sizes of Tygon® UV Resistant Tubing have sufficient
wall thickness to block transmission of all UV
light.
Excellent Burn Resistance
Tygon® UV Resistant
Tubing will meet UL 94V-0 and UL 94HB flammability
ratings. Specifying Tygon® UV Resistant Tubing for
use in equipment that requires specific burn
characteristics can help to simplify the approval
process.
Click
for complete size chart
*Tygon®
R-3400 tubing is not intended for use as an implant
|
|
Tygon®
R-3400 Tubing Typical Physical Properties
|
Property |
ASTM Method |
Value or Rating |
|
Durometer Hardness - Shore A, 15 sec |
D2240-02 |
64 |
|
Color |
- |
Black |
|
Tensile Strength - psi (MPa) |
D412-98 |
2,250 (15.5) |
|
Ultimate Elongation, % |
D412-98 |
350 |
|
Tear Resistance - lb-f/inch (kN/m) |
D1004-94 |
185 (32) |
|
Specific Gravity |
D792-00 |
1.31 |
|
Water Absorption, % - 24 hours @ 23ºC |
D570-98 |
0.19 |
|
Compression Set Constant Deflection, % @
158ºF (70ºC) for 22 hours |
D395-02 - Method B |
64 |
|
Brittleness by Impact Temp - ºF (ºC) |
D746-98 |
-6 (-21) |
|
Max Recommended Operating Temp - ºF (ºC) |
- |
165 (74) |
|
Dielectric Strength - v/mil (kV/mm) |
D149-97 |
490 (19.3) |
|
Tensile Modulus, @ 100% Elongation, psi (MPa) |
D412-98 |
1,000 (6.9) |
|
Tensile Set, % |
D412-98 |
56 |
Unless
otherwise noted, all tests were conducted at room
temperature (73ºF). Values shown were determined
on 0.075" thick extruded strip or 0.075" thick
molded ASTM plaques or molded ASTM durometer
buttons. |
|
|
|
|
|
