|
|
| |
| |
Tygon®
Ultra Soft Tubing |
|
Tygon®
Ultra-Soft Tubing provides unmatched
flexibility and drapeability –
characteristics
beneficial to numerous
laboratory set-ups. |
| |
Biopharmaceutical
Formulation R-1000
Features/Benefits
-
Ultra-soft and flexible
-
Performs well at low temperatures (to
-100˚F)
-
Excellent for use in low-torque
pump
applications
-
Resistant to a broad range of
corrosive
chemicals
-
Meets FDA CFR part 175.3000
Typical Applications
-
General laboratory
-
Analytical instruments
-
Peristaltic pumps
-
Vent and drain lines.
|
|
A Flexible Alternative to Complex Laboratory
Set-ups
Extremely flexible,
Tygon® Ultra-Soft Tubing is the solution to
applications requiring maximum drapeability and kink
resistance. Even under laboratory set-ups with
abrupt radius curves and multiple directional
changes, Tygon® Ultra-Soft Tubing resists twisting
and collapse - common problems when using other
tubing products. Tygon® Ultra-Soft Tubing stays
flexible at temperatures as low as -100˚F (-73˚C).
Its smooth bore facilitates easy cleaning and helps
prevent possible buildup.
Tygon® Ultra-Soft Tubing provides
unmatched flexibility and drapeability -
characteristics beneficial to numerous
laboratory set-ups.
The Preferred Tubing in Low-Torque
Peristaltic Pumps
The extremely low
durometer of Tygon® Ultra-Soft Tubing provides
minimal resistance to compression. This feature is
ideal when using low-torque or battery-driven
peristaltic pumps and provides an excellent
alternative to silicone tubing where corrosive
chemicals are used.
Tygon® Ultra-Soft
Tubing will typically outlast silicone tubing in
peristaltic pump applications by a margin of 2 to 1.
Click for complete size chart
|
|
|
|
Tygon® R-1000
Tubing Typical Physical Properties
|
Property |
ASTM Method |
Value or Rating |
|
Durometer Hardness - Shore A, 15 sec |
D2240-02 |
40 |
|
Color |
- |
Clear |
|
Tensile Strength - psi (MPa) |
D412-98 |
1,200 (8.3) |
|
Ultimate Elongation, % |
D412-98 |
375 |
|
Tear Resistance - lb-f/inch (kN/m) |
D1004-94 |
52 (9) |
|
Specific Gravity |
D792-00 |
1.12 |
|
Water Absorption, % - 24 hours @ 23ºC |
D570-98 |
0.30 |
Compression Set Constant Deflection, % -
@ 158ºF (70ºC) for 22 hours |
D395-01- Method B |
57 |
|
Brittleness by Impact Temp - ºF (ºC) |
D746-98 |
-103 (-75) |
|
Max Recommended Operating Temp - ºF (ºC) |
- |
125 (52) |
|
Dielectric Strength - v/mil (kV/mm) |
D149-97 |
500 (19.7) |
|
Tensile Modulus, @ 200% Elongation, psi (MPa) |
D412-98 |
330 (2.2) |
|
Tensile Set, % |
D412-98 |
73 |
Unless
otherwise noted, all tests were conducted at room
temperature (73ºF). Values shown were
determined on 0.075" thick extruded strip or 0.075"
thick molded ASTM plaques or molded ASTM durometer
buttons. |
|
|
|
|
|
|
|
|
|
