|
Since Tygon® 2275 I.B. High Purity Pressure
Tubing is hydrophobic and resists the
sorption of aqueous fluids, it minimizes the
risk of fluid
alteration in single-use or
repeat-use applications. |
Biopharmaceutical Formulation 2275 I.B.
High-purity pressure tubing with low
sorption, flexibility and clarity, available
in a single tubing.
Features/Benefits
-
Low sorption to aqueous fluids
-
Plasticizer free
-
Tough braid reinforcement for
elevated working pressures
-
Meets USP Class VI, FDA criteria
Typical Applications
-
Deionized Water Systems
-
Sterile Fill Lines
-
Cell Harvest and Media Process Systems
-
Water For Injection (WFI) Transport
-
Preservative Fill Lines
-
Pharmaceutical and Cosmetic Processing
-
Chemical Transfer
|
|
Minimize Fluid Alteration and Loss
Maintaining product
integrity during fluid transfer is critical in most
pharmaceutical and biotechnology applications. Loss
of fluid through migration into the tubing or
adherence of fluid onto the tubing walls may create
inconsistencies in final product results. TYGON®
2275 I.B. High-Purity Tubing is hydrophobic and
resists the sorption (absorption/adsorption) of
aqueous fluids. This reduction in sorption minimizes
the risk of fluid alteration in single or repeat-use
applications.
Flexibility Without the Use of Plasticizers
Until now, clear,
flexible tubing was restricted from use in many
applications due to concern of plasticizer
extraction. TYGON 2275 I.B. High-Purity Tubing is
entirely free of any plasticizers. This unique
tubing uses the latest in polymer technology to
provide a clear (between braid) and flexible tubing
choice for sensitive fluid transfer applications.
Superb Chemical Resistance Provides Versatility in
Cleaning and Sterilization
TYGON 2275 I.B.
tubing is virtually unaffected by chemical
sanitizers and cleaners. As a result, it can be
cleaned repeatedly without decreasing its service
life. The non-wettable surface of the product
facilitates complete drainage of fluid during the
cleaning process. In addition, TYGON 2275 I.B.
tubing can be sterilized easily using conventional
gamma radiation, gas (ethylene oxide), steam, and
autoclave methods.
Click
for complete size chart |
|
Tygon®
2275 I.B. Tubing Typical Physical Properties
|
Property |
ASTM Method |
Value or Rating |
|
Durometer Hardness - Shore A, 15 sec |
D2240-97 |
72 |
|
Color |
- |
Clear |
|
Tensile Strength - psi (MPa) |
D412-97 |
2,000 (13.8) |
|
Ultimate Elongation, % |
D412-97 |
700 |
|
Tear Resistance - lb-f/inch (kN/m) |
D1004-93 |
220 (39) |
|
Specific Gravity |
D792-91 |
0.9 |
|
Water Absorption, % - 24 hours @ 23ºC |
D570-95 |
< 0.01 |
|
Compression Set Constant Deflection, % - @
158ºF (70ºC) for 22 hours |
D395-89 - Method B |
84 |
|
Brittleness by Impact Temp - ºF (ºC) |
D746-95 |
-108 (-78) |
|
Max Recommended Operating Temp - ºF (ºC) |
- |
125 (52) |
|
Low Temperature Flexibility, ºF (ºC) |
D380-87 |
-94 (-70) |
|
Dielectric Strength - v/mil (kV/mm) |
D149-93 |
587 (23.1) |
|
Tensile Modulus, @ 200% Elongation, psi (MPa) |
D412-97 |
375 (2.6) |
|
Tensile Set, % |
D412-97 |
187 |
|
Toxicity |
- |
Non-Toxic |
Unless
otherwise noted, all tests were conducted at room
temperature (73ºF). Values shown were determined
on 0.075" thick extruded strip or 0.075" thick
molded ASTM plaques or molded ASTM durometer
buttons.
|
