|
|
| |
| |
Tygon®
Ultra Chemical Resistant Tubing |
|
After being immersed in aggressive MEK for
16 hours (plus 4 hours drying time), Tygon®
2075 Ultra
Chemical Resistant Tubing is
still clear and
flexible while PVC tubing is
completely degraded
and rendered useless. |
Biopharmaceutical Formulation 2075
Provides the highest degree of chemical
resistance in a clear, flexible tubing.
Features/Benefits
-
Resistant to MEK and other highly
aggressive chemicals
-
Plasticizer-free
-
Safer disposal through incineration
-
Smoother inner surface inhibits
particulate build-up
-
Hydrophobic property reduces absorption
of aqueous fluids
-
Minimal outgassing from tubing protects
sensitive environments.
Typical Applications
-
Fine and
specialty chemical production
-
Battery acid
filling
-
Clean and
degreaser transfer systems
-
X-ray processing
-
Paint and solvent
production
-
Ink and printing
fluid dispensing
-
Hazardous materials
handling
-
Power generation sampling
and drain lines
|
|
Unequaled Chemical
Resistance
Until now, many
applications for clear flexible tubing were limited
due to chemical attack from the fluid being
transported. Tygon® 2075 Ultra Chemical Resistant
Tubing broadens the range of usability with its
expanded chemical resistance. The tubing is
virtually unaffected by acids, bases, ketones, salts
and alcohols.
Reduced Disposal Concern
Incineration is one
of the most commonly used methods of disposing of
contaminated materials. But, many tubings contribute
to environmental problems because they release
hazardous by-products, such as chlorine, when
burned. Tygon® 2075 tubing releases only carbon
dioxide and water when properly incinerated.
Contains No Plasticizer
Tygon® 2075 Ultra
Chemical Resistant Tubing is entirely free of
plasticizers. Fluid contamination from leaching
plasticizers, a common occurrence with other
flexible tubings, is eliminated, as is premature
cracking or embrittlement due to plasticizer
extraction.
Additional Product
Features
Extremely smooth
inner surface — Tygon® 2075 has a much smoother
surface than other flexible plastic and rubber
tubings, which inhibits particulate build-up,
reduces the potential for contamination, and
facilitates thorough cleaning.
Hydrophobic qualities
— Tygon® 2075 resists absorption of aqueous
fluids, minimizing the risk that the material being
transported will be contaminated by residue from
previous applications.
Extremely low
outgassing properties — This is a critical
characteristic in controlled environment
applications where contamination is a concern.
Click
for complete size chart
|
|
Tygon®
2075 Tubing Typical Physical Properties |
|
Property |
ASTM Method |
Value or Rating |
|
Durometer Hardness - Shore A, 15 sec |
D2240-02 |
72 |
|
Color |
- |
Clear |
|
Tensile Strength - psi (MPa) |
D412-98 |
2,000 (13.8) |
|
Ultimate Elongation, % |
D412-98 |
700 |
|
Tear Resistance - lb-f/inch (kN/m) |
D1004-94 |
220 (39) |
|
Specific Gravity |
D792-00 |
0.9 |
|
Water Absorption, % - 24 hours @ 23ºC |
D570-98 |
< 0.01 |
|
Compression Set Constant Deflection, % - @
158ºF (70ºC) for 22 hours |
D395-89 - Method B |
84 |
|
Brittleness by Impact Temp - ºF (ºC) |
D746-98 |
-108 (-78) |
|
Max Recommended Operating Temp - ºF (ºC) |
- |
125 (52) |
|
Low Temperature Flexibility, ºF (ºC) |
D380-94 |
-94 (-70) |
|
Dielectric Strength - v/mil (kV/mm) |
D149-97 |
587 (23.1) |
|
Tensile Modulus, @ 200% Elongation, psi (MPa) |
D412-98 |
350 (2.4) |
|
Tensile Set, % |
D412-98 |
187 |
Unless
otherwise noted, all tests were conducted at room
temperature (73ºF). Values shown were determined
on 0.075" thick extruded strip or 0.075" thick
molded ASTM plaques or molded ASTM durometer
buttons. |
|
|
|
|
|
