Photos:
(left) Polypropylene
Ball Valve
(center) Diaphragm Valve
(right) Polypropylene Valve Body with Silicone
Sanitary Drain Product Options
Ball Valve --
Polypropylene
Diaphragm Valve --
Polypropylene
Sanitary Conical Drain
Valve -- Polypropylene Valve Body with Silicone
Diaphragm
USDA, food-grade
polypropylene ball
USDA, food-grade
polypropylene housing
Manually activated
1/4-turn opening and
closing
Perfluoroalkoxy (PFA)
interior diaphragm
Allows for complete
drainage
Sanitary flanges
Multi-position handle to
precisely vary the flow rate
Assures complete mixing
Flush time approximate
45 seconds
Flush time approximate 6
seconds
Eliminates "dead leg"
Autoclavable when handle
is removed
Not autoclavable
Stainless steel spacer
ring
Glass-filled acetal
locking ring
Factory installed only
Ball
Valve-Polypropylene
Cat. No. 2673
-0150**
Size, mm; in.
38; 1-1/2 tri
** Other sizes available.
Diaphragm
Valve-Polypropylene
Cat. No. 2674
-0150**
Size, mm; in.
38; 1-1/2
Replacement Diaphragm
Cat. No. 2696
-1501
-2001
Size, mm; in.
Diaphragm Material
38; 1-1/2
Silicone
51; 2
Silicone
Conical Drain
Valve-Polypropylene
Cat. No. 2695
-1501
-2001
-2101
Size, mm; in.
38; 1-1/2
51; 2
51; 2*
* Fits 1400-L sanitary
conical-bottom tanks only.
Conical Drain Valve-PVDF
Cat. No. 2697
-1501
-2001
Size, mm; in.
38; 1-1/2
51; 2
Sanitary Fittings and Accessories
The following accessories and factory-installed ferrules are
available options for Saint-Gobain Performance Plastics
sanitary tank products.
Use them to modify the tank for your
specific application. Specify fittings and placement
location when ordering tank.
Installed Sanitary Ferrules, Gaskets
and True Union Clamps
Installed Sanitary Ferrules-
High-Density Polyethylene; Polypropylene; Polyvinylidene
Fluoride
Customize the vessels to your
specific processing needs using the ferrules
Accessories require 2" connections
for installation
Installed Sanitary
Ferrules-HDPE
Cat. No. 2660
-0075
-0100
-0150
-0200
-0300
-0400
-0600
Size, mm; in.
19; 3/4 mini
25; 1 tri/ladish
38; 1-1/2 tri
51; 2 tri
76; 3 tri
102; 4 tri
152; 6 tri
Installed Sanitary
Ferrules-PP
Cat. No. 2661
-0075
-0100
-0150
-0200
-0300
-0400
-0600
Size, mm; in.
19; 3/4 mini
25; 1 tri/ladish
38; 1-1/2 tri
51; 2 tri
76; 3 tri
102; 4 tri
152; 6 tri
Installed Sanitary
Ferrules-PVDF
Cat. No. 2692
-0075
-0100
-0150
-0200
-0300
-0400
Size, mm; in.
19; 3/4 mini
25; 1 tri/ladish
38; 1-1/2 tri
51; 2 tri
76; 3 tri
102; 4 tri
4" and larger fittings may have
placement restrictions. Contact customer service or
technical department for assistance.
True Union Clamps-
PVDF - For prevention of damage to plastic connections
- Autoclavable
Cat. No. 2670
-0075
-0150
-0200
-0300
Size, mm; in.
19; 3/4 mini
38; 1-1/2 tri
51; 2 tri
76;3 tri
Recommended for use with plastic
fittings.
Avoids over-tightening which can crack the fitting.
Maintains concentric connections.
Sanitary Caps, Sweeps, Reducers
and Heavy Duty Clamp
Photos: (left) End and
Sight Caps
(center) Elbow Sweeps
(right) Heavy Duty Clamp
End Caps-
Polypropylene - Autoclavable, seals ferrule when not in use
Cat. No. 2665
-0075
-0150
-0200
-0300
-0400
-0600
Size, mm
Size, in.
19
3/4 mini
38
1-1/2 tri
51
2 tri
76
3 tri
102
4 tri
152
6 tri
Sight Caps-Polysulfone*
- Allows Visibility into Vessel - Autoclavable
Cat. No. 2666
-0200-
0300
Size, mm; in.
51; 2 tri
76; 3 tri
* Other sizes available
Elbow Sweeps and
Concentric Reducers-Polypropylene - Autoclavable
Cat. No.
2662-0150
2663-0150
Angle
Size, mm, in.
90°
38, 1-1/2 tri
45°
38, 1-1/2 tri
* Other sizes available
Concentric
Reducers-Polypropylene*
Cat. No. 2669
-0001
-0002
-0004
-0005
-0006
Size, mm
Size, in.
19 x 38
3/4 mini x 1-1/2 tri
25 x 38
1 tri x 1-1/2 tri
51 x 38
2 tri x 1-1/2 tri
51 x 25
2 tri x 1 tri
51 x 76
2 tri x 3 tri
* Other sizes available
Heavy Duty
Clamps-Stainless Steel
Spring-loaded clamps to ensure tight,
leak-proof connection
Autoclavable
Cat. No. 2685
-0150
-0200
-0300
-0400
-0600
Size, mm; in.
38; 1-1/2
1; 2
76; 3
102; 4
152; 6
Not recommended for use with
plastic fittings.
TerraPort™
TerraPort™ is the
answer to the fragile sanitary fittings currently
used on non-metallic vessels.
Traditionally, non-metallic vessels that need to be
sanitary are fitted with thin walled, welded
sanitary fittings. TerraPort™ is machined
from solid FDA/USP class VI compliant polypropylene
bar stock. Non-metallic sanitary fittings protrude
outward from the tank wall several inches leaving
them vulnerable to impact. TerraPort™ is a
low profile (1”) welded port that protrudes outward
from the tank wall, no further than the existing top
lip of the tank.
Non-metallic sanitary
fittings have a very fragile thin wall flange area
for sealing that, once damaged, could render the
entire vessel it is attached to useless. TerraPort™
houses the sealing area within the fitting
protecting it from impact for worry-free transport
and plumbing.
Feature and Benefits
Designed to enable users to apply aseptic practices to
fluid connections on non-metallic or metallic tanks and
vessels.
Low profile design
protects sealing surface from inadvertent damage by
recessing it within the housing of the TerraPort
receiver.
Welding TerraPort
to a thermoplastic vessel provides the most solid and
secure means for fluid connection possible.
Clamping mechanism is
simple and quick to install, no tools required.
