Customized platinum-cured silicone inflatable gaskets are a cost-effective way to provide a seal for vacuum paddle dryers to prevent bacteria and particulate invasion.
Each gasket is extruded, cut to length and bonded to form a variety of inner-diameter sizes. All gaskets can be customized to a particular length and manufactured with or without sealing grooves.
LARGE SILICONE GASKET WITH SEALING GROOVES
Part Number |
Cut Length - Inches |
Cut Total - +/- |
Nipple Placement |
LGR-GSK-158B |
158.7 |
0.375 |
B |
LGR-GSK-137A |
137 |
0.375 |
A |
LGR-GSK-137B |
138 |
0.375 |
B |
LGR-GSK-135A |
135 |
0.375 |
A |
LGR-GSK-121A |
121.7 |
0.375 |
A |
LGR-GSK-39A |
39.3 |
0.188 |
A |
LARGE SILICONE GASKET WITHOUT SEALING GROOVES
Part Number |
Cut Length - Inches |
Cut Total - +/- |
Nipple Placement |
LGR-GSK-158B |
158.7 |
0.375 |
B |
LGR-GSK-135A |
135 |
0.375 |
A |
SMALL SILICONE GASKET WITHOUT SEALING GROOVES
Part Number |
Cut Length - Inches |
Cut Total - +/- |
Nipple Placement |
SGR-GSK-71B |
71.4 |
0.188 |
B |
SGR-GSK-67A |
67.4 |
0.188 |
A |
SGR-GSK-62B |
62.6 |
0.188 |
B |
SGR-GSK-51A |
51.6 |
0.188 |
A |
Note: Nipple placement is 180° from the splice on the outside of the gasket in either position A or B.
|