|
|
| |
| |
PharmaSmooth Hose Styles |
|
| |
| Features: |
- Ultra
smooth OD surface
- Easy to
clean
- Smooth ID
when bent
- Imparts
no taste or odor
- Excellent
bent radius
- Kink
resistant
-
Sterilizable and autoclavable
- Non-aging
liner
- Full
vacuum rated
- Super
chemical resistant
|
|
PharmaSmooth Hoses are made:
Inner Tube:
Chemfluor® FEP
Cover: EPDM
rubber cover
Reinforcement:
--Multiple polyester plycord and EPDM rubber
--Double helix, high tensile strength carbon
steel wire
Colors:
--Light grey with a white layline in grey
lettering
--Other colors are available as special orders.
Minimum quantity required. Consult factory
for details.
Temperature
Rating:
-40°F to
+350°F
-40°C to
+177°C |
| |
|
| Typical Applications: |
- Load
cells
- Skid
transfer
- Pumping
stations/ portable pumps
- Vessel or
tank transfer
- Rail car
loading/ unloading
- Transfer
lines
- CIP
- Chemical
process lines
Connections:
- Permaseal®
Crimp style fittings
-
Flare-Thru fittings
Approvals:
- FDA per
21CFR177.1550
- US
Pharmacopeia case VI
|
|
|
PharmaSmooth Hose Typical Physical Properties
|
|
Property |
ASTM Method |
Value or Rating |
|
Durometer Hardness - Shore A, 15 sec |
D2240-91 |
55D, 58D, 60D |
|
Color |
- |
Translucent |
|
Tensile Strength - psi (MPa) |
- |
3,000 - 5,000 (20.7-34.5) |
|
Ultimate Elongation, % |
D1457, D1708, D638, 325, 300 |
300-325 |
|
Tear Resistance - lb-f/inch (kN/m) |
- |
- |
|
Specific Gravity |
D792-00 |
2.13-2.22 |
|
Water Absorption, % - 24 hours @ 23ºC |
D570-81 |
<
0.01-0.03 |
|
Compression Set Constant Deflection, % - @
158ºF (70ºC) for 22 hours |
- |
- |
|
Brittleness by Impact Temp - ºF (ºC) |
D746-79 |
-450ºF -- -100ºF |
|
Max Recommended Operating Temp - ºF (ºC) |
- |
400-500 (204-260) |
|
Dielectric Strength - v/mil (kV/mm) |
- |
- |
|
Tensile Modulus, @ 200% Elongation, psi (MPa) |
- |
3,000-5,000
(20.7-34.5) |
|
Tensile Set, % |
- |
- |
|
|
|
|
|
|
PharmaSmooth™ Hose
Specifications |
|
|
Part
Number
|
Hose
Size I.D. in.
|
Hose
Size I.D. MM
|
Hose
Size O.D., in.
|
Hose
Size O.D., MM
|
Max.
Working Pressure (PSI)
|
Min.
Burst Pressure (PSI)
|
Wt.
Per Ft. (LB)
|
|
8PSTLCT
|
1/2 |
12.7 |
7/8 |
23.1 |
500 |
2100 |
.35 |
|
12PSTLCT
|
3/4 |
19.1 |
1 1/4 |
31.8 |
500 |
2100 |
.62 |
|
16PSTLCT
|
1 |
25.4 |
1 1/2 |
38.1 |
450 |
1800 |
.75 |
|
20PSTLCT
|
1 1/4
|
31.8 |
1 3/4 |
44.5 |
320 |
1600 |
.98 |
|
24PSTLCT
|
1 1/2
|
38.1 |
2 |
52.1 |
300 |
1350 |
1.20 |
|
32PSTLCT
|
2
|
50.8 |
2 5/8 |
67.3 |
250 |
1200 |
1.50 |
|
40PSTLCT |
2 1/2 |
63.5 |
3 1/4 |
81.3 |
200 |
900 |
2.35 |
|
48PSTLCT |
3 |
76.2 |
3 3/4 |
93.0 |
150 |
700 |
2.50 |
|
64PSTLCT
|
4
|
101.60 |
4 3/4 |
119.4 |
150 |
600 |
3.60 |
|
|
|
Note: Weights and
outside diameter dimensions are nominal. End fitting vs.
hose pressure limitations must be considered and the lower
of the two ratings must be used on assemblies.
Burst Pressure ratings at ambient 70ºF
(21ºC). See applicable notes below on vacuum/pressure
ratings at temperatures other than ambient.
Working Pressure is
given @ 70ºF; Decrease working pressure 1% for every 2ºF
above 212ºF.
Vacuum Rating is given
@ 70ºF; Decrease vacuum rating 1% for every 2ºF above
212ºF. 1-1/4" and larger sizes, vacuum rating decreases
when installed less than 2X min. bend radius.
Flare-Thru fittings are pressure rated. Not rated for
vacuum service.
Extended Service Life Tip: Suggest using full-length
anti-kink armor casing or at least 16" to 24" long anti-kink
cuffs
(see Hose Cover Options)
at each fitting end to help reduce the strain on the crimp
collar and fittings in high load installations. Prolonged
service at elevated temperatures will reduce total service
life. |
|
|
