| |
Plastic Fittings - End Caps |
|
Bio Cap |
|
Bio
Cap available in PP only. |
The Bio Cap is the only non-metallic cap
with a built-in tab for quick removal,
which reduces potential damage to
sanitary flanges.
The tab eliminates the tendency to use
non-sanitary tools, including
screwdrivers and pliers, to assist in
cap removal. The cap is delivered with
permanent size and lot number
identification to ensure proper use and
easy traceability. |
| |
|
|
| Flat
End Cap |
|
The Flat
End Cap has the same uses as the Bio Cap, but
its designed without the built-in tab. Flat End
Caps may also be modified to accept female
threads and be integrated into dip tube
fabrications.
Flat End Cap available in both PP and PVDF. |
| |
|
Bio Cap Features: |
Use the Bio Cap and Flat End Cap
with: |
- Built-in tab
for easy removal
- Disposable
- Non-metallic
- Autoclave or
irradiate to sterilize
- Size and lot
number permanently molded onto the
component
- Constructed
of polypropylene with a drug master
file
resin that conforms to FDA and USP
Class VI
requirements
- Recommended
working pressure, 150psi @ 70˚ F
|
- Bioprocess
containers
- Bioreactors
- Fermentors
- Flexible
packaging systems
- Filling
machines
- Filtration
and purification systems
- Mixing
containers and vessels
- Rigid piping
systems
- Sampling
ports
- Tubing sets
|
|
|
Dimensional and Physical Properties of the Bio
Cap and Flat End Cap |
| |
|
 |
|
 |
NOTES:
(Pertaining to Bio Cap only)
1. This face to be flat to 0.15mm.
Maximum ejector witness permissible
0.07mm
2.Batch Code to be moulded on part in
this area
3. No flash or imperfection permissible
on front edge of moulding
4. No contamination allowed
5. Maximum split line flash 0.2mm
6. Part to be manufactured in cleanroom
environment
7. Injection gate mark to be trimmed
flush |
|
| |
|
Size |
Part
Number |
Dim "A" |
Dim "B" (d) |
|
Bio Cap |
|
|
|
|
.5-.75" |
PPCAP075-T |
.985" |
1.182" |
|
1-1.5" |
PPCAP150-T |
1.989" |
1.182" |
|
Flat End Cap |
|
|
|
|
.5-.75" |
(PP, PVDF)
CAP075 |
.992" |
.188" |
|
1-1.5" |
(PP, PVDF)
CAP150 |
1.984" |
.240" |
|
2" |
(PP, PVDF)
CAP200 |
2.516" |
.240" |
|
2.5" |
(PP, PVDF)
CAP250 |
3.047" |
.240" |
|
3" |
(PP, PVDF)
CAP300 |
3.579" |
.240" |
|
4" |
(PP, PVDF)
CAP400 |
4.682" |
.240" |
|
6" |
(PP, PVDF)
CAP600 |
6.57" |
.480" |
|
| |
|
Resin
Data |
Tensile
Strength |
Flexural
Modulus |
Hardness |
Heat
Deflection |
Water
Absorption |
Maximum
Recommended Working Temperature F˚ |
|
Polypropylene used in Bio Cap |
29.5 Mpa
(50mm/min)
ISO 527-2 |
1100 Mpa
(1mm/min)
ISO 527-2 |
94, R-scale,
Rockwell
ISO 2039-2 |
90˚ C @ .45
Mpa
ISO 75-2 |
|
180˚ F |
|
Polypropylene used Flat End Cap |
3900 psi
(2 in/min)
ASTM D 638 |
160000 psi
ASTM D 790 |
80, R-scale,
Rockwell
ASTM D-785 |
87.8˚ F @ 66
psi
ASTM D 648 |
.01%
(24 hour duration) |
180˚ F |
|
PVDF used in
Flat End Cap |
5000-7000
psi
ASTM D 638 |
240000-335000 psi
ASTM D 790 |
76-80
Shore D
ASTM D 2240 |
257-284˚ F @
66 psi
ASTM D 648 |
.01-.03%
(24 hour duration) |
240˚ F |
|
| Physical
properties provided as general guidelines only.
It is the end-users responsibility to ensure
that the above mentioned products are compatible
with the intended application and that the
products are in compliance with all applicable
regulatory requirements for use. User assumes
all risk of usage. |
| |
| |
| |
| |
