| |
Plastic Fittings - Bio Y |
 |
The Bio Y provides a cleaner, purer
transfer of medium. True-bore ID results
in full drainage with less turbulence
and entrapment because the Bio Y
perfectly matches tubing ID: flow levels
between tubing and the Bio Y are always
compatible. Eliminate time consuming
flow calculations by using the Bio Y
which achieves the same effect as a
molded Y with the flexibility of
in-house installation. The unique
over-sized barb adds compression between
the tube and fitting, providing a secure
connection without cumbersome ties. The
Bio Y is the only adapter with permanent
size and lot number identification to
ensure proper use and easy traceability.
|
|
| |
| Bio Y
is available in: .25”, .375”, .5”, .625”
.75”, .875” and 1” hose barb. |
| |
|
|
Bio Y Features: |
Use the Bio Y with: |
- Disposable
- Autoclave or
irradiate to sterilize
- True-bore ID
- Size and lot
number permanently molded onto the
component
- Strong
adhesion without ties
- Constructed
of polypropylene with a drug master
file resin that conforms to FDA and
USP Class VI requirements.
- Maximum
recommended working pressure
150 psi @ 70° F.
|
- Bioprocess
containers
- Bioreactors
- Fermentors
- Flexible
packaging systems
- Filling
machines
- Filtration
and purification systems
- Mixing
containers and vessels
- Sampling
ports
- Tubing sets
|
|
|
Dimensional and Physical Properties |
| |
|
 |
 |
|
 |
NOTES:
1. Batch code to be moulded on part in
this area
2. Injection feed mark to be flush
3. Component size identification to be
moulded in this position
4. No flash or imperfections permissible
on front edge of spouts
5. No flash permissible on internal core
intersection
6. No contamination allowed
7. Part to be manufactured in cleanroom
environment |
|
| |
|
Size HB |
Part Number |
Connection
Angle |
Dim "A" (in) |
Dim "B" (in) |
Dim "C" (in) |
|
.250" |
PP0250BY |
120 deg |
2.434" |
1.438" |
.250" |
|
.375" |
PP0375BY |
120 deg |
2.851" |
1.741" |
.375" |
|
.500" |
PP0500BY |
120 deg |
2.963" |
1.741" |
.500" |
|
.625" |
PP0625BY |
120 deg |
33.21" |
1.980" |
.625" |
|
.750" |
PP0750BY |
120 deg |
3.758" |
2.212" |
.750" |
|
.875" |
PP0875BY |
120 deg |
3.850" |
2.186" |
.875" |
|
1.000" |
PP1000BY |
120 deg |
3.850" |
2.298" |
1.000" |
|
| |
|
Resin
Data |
Tensile
Strength |
Flexural
Modulus |
Hardness |
Heat
Deflection |
Water
Absorption |
Maximum
Recommended Working Temperature F˚ |
|
Polypropylene used in Bio Y |
29.5 Mpa
(50mm/min)
ISO 527-2 |
1100 Mpa
(1mm/min)
ISO 527-2 |
94, R-scale,
Rockwell
ISO 2039-2 |
90˚ C @ .45
Mpa
ISO 75-2 |
|
180˚ F |
|
| Physical
properties provided as general guidelines only.
It is the end-users responsibility to ensure
that the above mentioned products are compatible
with the intended application and that the
products are in compliance with all applicable
regulatory requirements for use. User assumes
all risk of usage. |
| |
| |
| |
| |
