| |
Plastic Fittings - Bio Barb |
 |
The design of the Bio Barbฎ Adapter
lends itself to a cleaner, purer
transfer of medium.
True-bore ID results in full drainage
with less turbulence and entrapment
because the Bio Barb Adapter perfectly
matches tubing ID: flow levels between
tubing and the adapter are always
compatible. Eliminate time-consuming
flow calculations by using the Bio Barb
Adapter which achieves the same effect
as a modeled end with the flexibility of
in-house installation. The unique
over-sized barb adds compression between
the tube and fitting, providing a secure
connection without cumbersome ties.
Added compression significantly reduces
fluid by-pass which reduces entrapment. The
Bio Barb is the only adapter with
permanent size and lot number
identification molded onto the adapter to ensure proper use and
easy traceability. Non-metallic
polypropylene sanitary flange conforms
to ISO 2852. |
|
| |
Bio Barb Adapters are
available in: 1 and 1.5 sanitary flange by
.125, .25, .375, .5, .625, .75, .875 and
1 hose barb.
Bio Barb Mini-Sanitary Flange Adapters are
available in: Mini sanitary flange by .125,
.25, .375, .5 and .625 hose barb. |
| |
|
Bio Barb Adapter Features: |
|
Use the Bio Barb Adapter with: |
- Disposable
- Autoclave or
irradiate to sterilize
- True-bore ID
- Size and lot
number permanently molded onto the
component
- Strong
adhesion without ties
- Constructed
of polypropylene with a drug master
file resin that conforms to FDA and
USP Class VI requirements.
- Maximum
recommended working pressure, 150psi
@ 70ฐ F when attached to tubing.
|
|
- Bioprocess
containers
- Bioreactors
- Fermentors
- Flexible
packaging systems
- Filling
machines
- Filtration
and purification systems
- Mixing
containers and vessels
- Sampling
ports
- Tubing Sets
|
|
The resin that is
utilized complies to USP Class VI, EP
3.1 and FDA regulations and
requirements. |
|
|
|
Dimensional and Physical Properties |
|
|
|
| |
|
Size TC x HB |
Part
Number |
Dim "A"
(in) |
Dim "B"
(in) |
Dim "C"
(in) |
Dim "D"
(in) |
Max
Working Pres. (psi) |
|
Mini x 1/8" |
PPMINITC0125BB |
.125" |
1.698" |
.985" |
.125" |
150 |
|
Mini x 1/4" |
PPMINITC0250BB |
.250" |
1.661" |
.985" |
.250" |
150 |
|
Mini x 3/8" |
PPMINITC0375BB |
.375" |
1.880" |
.985" |
.375" |
150 |
|
Mini x 1/2" |
PPMINITC0500BB |
.500" |
1.847" |
.985" |
.500" |
150 |
|
Mini x 5/8" |
PPMINITC0625BB |
.625" |
1.939" |
.985" |
.625" |
150 |
|
1" / 1-1/2"
x 1/8" |
PP100/150TC0125BB |
.125" |
1.843" |
1.989" |
.125" |
150 |
|
1" / 1-1/2"
x 1/4" |
PP100/150TC0250BB |
.250" |
1.806" |
1.989" |
.250" |
150 |
|
1" / 1-1/2"
x 3/8" |
PP100/150TC0375BB |
.375" |
2.026" |
1.989" |
.375" |
150 |
|
1" / 1-1/2"
x 1/2" |
PP100/150TC0500BB |
.500" |
1.992" |
1.989" |
.500" |
150 |
|
1" / 1-1/2"
x 5/8" |
PP100/150TC0625BB |
.625" |
2.147" |
1.989" |
.625" |
150 |
|
1" / 1-1/2"
x 3/4" |
PP100/150TC0750BB |
.750" |
2.147" |
1.989" |
.750" |
150 |
|
1" / 1-1/2"
x 7/8" |
PP100/150TC0875BB |
.875" |
2.147" |
1.989" |
.875" |
150 |
|
1" / 1-1/2"
x 1" |
PP100/150TC1000BB |
1.000" |
2.147" |
1.989" |
1.000" |
150 |
|
| |
|
Resin
Data |
Tensile
Strength |
Flexural
Modulus |
Hardness |
Heat
Deflection |
Water
Absorption |
Maximum
Recommended Working Temperature F˚ |
|
Polypropylene used in Bio Barb Adapter |
29.5 Mpa
(50mm/min)
ISO 527-2 |
1100 Mpa
(1mm/min)
ISO 527-2 |
94, R-scale,
Rockwell
ISO 2039-2 |
90˚C @ .45
Mpa
ISO 75-2 |
|
180˚ F |
|
|
Physical
properties provided as general guidelines only.
It is the end-users responsibility to ensure
that the above mentioned products are compatible
with the intended application and that the
products are in compliance with all applicable
regulatory requirements for use. User assumes
all risk of usage. |
| |
| |
| |
| |
